|
  |
INSERT SHAPER CUTTERS
SHIM TYPE ADJUSTABLE GROOVING HEAD |
|
 |
| This type of head will perform the same function as the dial type, but is more economical because it uses a set of steel shims to adjust head. |
 |
| Tool No. |
Price |
|
D |
B |
t |
d |
Max RPM |
| 61350 |
472.91 |
|
160MM (6-5/16") |
4.0 to 7.5MM (5/32" to 19/64") |
30MM (1-3/16") |
1-1/4" |
8,300 |
 |
| Order No. |
Price |
|
Description |
Size |
Qty. Required |
| RCK-71 |
4.23 |
|
4-sided knife #1 |
14x14x1.2MM |
4 |
| RCK-18 |
8.58 |
|
4-sided knife #2 |
18x18x2.0MM |
4 |
| 67170 |
Call Us |
 |
Screw retainer #1 |
4.0x.5x10MM |
4 |
| 67172 |
Call Us |
|
Screw retainer #2 |
4.0x.5x12MM |
4 |
| 67160 |
Call Us |
|
Flat head knife retaining screws |
4x.5x3.0MM |
8 |
| 67164 |
Call Us |
|
Slotted collar locking screw |
5x.8x7.0MM |
1 |
| 5090 |
Call Us |
|
Torx® key |
#T-9 |
1 |
67186 |
43.43 |
|
6-piece shim set |
.1,.4,.5MM & 3x1MM |
--- |
|
|
| This type of head will perform the same function as the dial type shown, but is more economical because it uses a set of steel shims to adjust head. |
 |
| Tool No. |
Price |
|
D |
B |
t |
d |
Max RPM |
| 61360 |
417.60 |
|
160MM (6-5/16") |
8.0 to 15MM (5/16" to 19/32") |
30MM (1-3/16") |
1-1/4" |
8,200 |
| 61362 |
355.10 |
|
160MM (6-5/16") |
12.5 to 24MM (1/2" to 15/16") |
30MM (1-3/16") |
1-1/4" |
8,200 |
|
| Order No. |
Price |
|
Description |
Size |
Qty. Required |
| RCK-70 |
4.10 |
|
4-sided knife #1 |
14x14x2.0MM |
4 |
| AMA-17 |
4.13 |
|
2-sided knife #2 |
7.5x12x1.5MM |
4(61360 only) |
| AMA-12 |
2.67 |
|
4-sided knife #3 |
12x12x1.5MM |
4(61362 only) |
| 67162 |
Call Us |
|
Slotted head knive screws |
5x.8x5MM |
4 |
| 67166 |
0.77 |
|
Allen head set screws |
5x.8x16MM |
4 |
| WB-42 |
11.30 |
|
Wedge blocks for 7.5MM knives |
--- |
4(61360 only) |
| WB-44 |
15.66 |
|
Wedge blocks for 15MM knives |
--- |
4(61362 only) |
| 5007 |
Call Us |
|
'L' shaped hex key |
2.5MM |
1 |
| 67186 |
43.43 |
|
6-piece shim set |
(1ea.@.1,.4,.5MM & 3 ea. @1.0MM |
1 |
*Products shown in
Blue
indicate Minimum order 10 each.
|
© 2003 Amana Tool Corporation. All Rights Reserved
|
|